Putco Quick Connect Direct Fit Wiring Harness for Blade LED Lights

Customer Reviews

1. 2nd gen trailer plug is much improved ( shorter) and LED light bar is great

   – Warren

2. Plug and play is exactly how easy this installation was. Works and looks great!

   – LIONEL ROSS SLETTEN

3. True plug and play

   – Wayne Mills

4. If you want the best and the easiest installation then the Putco Blade Plug and Play is the only choice you need make.

   – Larry

5. Great product easy installation should have had this before now it would have my job easy

   – Willie Joe

6. Plug and play – Great product! All you gotta do is tape the rev up and to the harness. Would recommend to a freind

   – Trevor

7. Blade Quick Connect Harness – Works perfectly as designed. Loved not having to splice any wires! Made the installation a breeze!

   – Tony Pinckney

8. compkete kit should be offered – the fact that this item wasn t offered with the light bar purchased had to recearch the highly needed part to make it work properly

   – Tony L

9. Quick and Easy – I installed a Putco 92009-60 Tailgate Light Bar Blade onto my 2017 Ram Laramie. I wasn t thrilled about the prospect of splicing into the factory loom. Then I discovered that they now offer a Quick Connect Harness. Although it does seem a little bit pricey I decided the absolute convenience was going to be totally worth it. And I was right. This device is literally a Plug and Play connector. The quality of this item was outstanding and it should last a very long time. The item was shipped with 2-day Prime. The instructions were clearly printed and very straight forward in easy to understand English. Their illustrations were very informative. It really only took a couple of minutes to hook this thing up. I did go for the option of hooking up to my backup light. That meant running a wire up to the backup light on the left rear tail light assembly. The white wire was actually part of the wiring supplied with the Putco Blade. So in conclusion this connector will make the installation of your tailgate light bar easier – a WHOLE LOT easier! But you will need to part with a few extra dollars in exchange for that convenience. In my humble opinion it was totally worth it.

   – Terry A. Moore

10. Quick and Easy – I installed a Putco 92009-60 Tailgate Light Bar Blade onto my 2017 Ram Laramie. I wasn t thrilled about the prospect of splicing into the factory loom. Then I discovered that they now offer a Quick Connect Harness. Although it does seem a little bit pricey I decided the absolute convenience was going to be totally worth it. And I was right. This device is literally a Plug and Play connector. The quality of this item was outstanding and it should last a very long time. The item was shipped with 2-day Prime. The instructions were clearly printed and very straight forward in easy to understand English. Their illustrations were very informative. It really only took a couple of minutes to hook this thing up. I did go for the option of hooking up to my backup light. That meant running a wire up to the backup light on the left rear tail light assembly. The white wire was actually part of the wiring supplied with the Putco Blade. So in conclusion this connector will make the installation of your tailgate light bar easier – a WHOLE LOT easier! But you will need to part with a few extra dollars in exchange for that convenience. In my humble opinion it was totally worth it.

    – Terry A. Moore

11. Worked great to sync rear light bar! – Worked great to sync rear light bar with brake and reverse lights without splicing into factory wires in 2021 Jeep JL with easy modifications. Now my light bar works in sync with my brakes reverse lights and turn signals. So easy!

    – StrayLineDesign

12. Clean OEM install – Have purchased many great for a quick install with the Blade tail light bar

    – steve.T

13. 2020 Tundra – worked great on my putco blade light and fit my 2020 Toyota Tundra Trd Sport Crewmax looks great

    – Ruben

14. Easy to install. Clean connecting and solid. – Hreat priduct

    – Real Coude

15. EASY hookup. No cutting or splicing just plug in. – The plug and play is so easy. Only thing I don t like is the four pin plug will not completely seat? I put plenty of umph on it but it won t seat?? Still works but I hope the slight exposure won t creat a problem.

    – Rex

16. Perfect plug and play – Liked OEM design but I added an ACDELCO PT722 pigtail to the reverse wire for even better install

    – Richard Hibbs

17. Great product but not compatible w/ 2018 F-150 w/ tow package – This is a great plug and play solution if it is spec ed for your vehicle. I assumed that this would work on a 2018 F150 but unfortunately it doesn t. Called Putco to check and due to having a backup camera backup sensors and Tow package the set up would have caused trailer error codes. Putco tech support sent me the correct wiring solution and diagrams to hard wire their Blade 92010-60 w/o issue.

    – Stan bucher

18. Great product but not compatible w/ 2018 F-150 w/ tow package – This is a great plug and play solution if it is spec ed for your vehicle. I assumed that this would work on a 2018 F150 but unfortunately it doesn t. Called Putco to check and due to having a backup camera backup sensors and Tow package the set up would have caused trailer error codes. Putco tech support sent me the correct wiring solution and diagrams to hard wire their Blade 92010-60 w/o issue.

    – Stan bucher

19. Worked great – Worked great

    – Priscilla

20. Worth the price and made connecting easy and quick – This made hooking up my putco blade to my 2019 ram 1500 dt it was quick and easy.

    – pete scanlon

21. Excellent time saver! – The good thing about this product is that you don t need to hack into your original wiring harness to wire something to it. It makes your accessory plug and play. It s a time and money saver not to mention it makes a real nice clean job of your installation.

    – Paul Fortin

22. Big install help!! – Love the quick connection. Works great. Hard to get to connections with the spare tire still installed. But got it all hooked up and works great. Used it with the tailgate light bar on my 2018 Ram 2500.

    – Myles Ram

23. Simple – Makes connecting Putco led blade so easy.

    – Mikers

24. Came without quick connect fittings to black and white wires – Putco Picture shows 4-pin connector plus white/black wires wires with quick connect fittings. It DOES NOT come with the quick connect fittings. Just bare wires. Misleading photo. Very disappointed.

    – masetonmaseton

25. Plug and play – Worked well with my Putco light bar

    – KyYo

26. First one faulty – Beware! First one running lights didn t work. Cost me a lot of money to figure that out. Requested a replacement and it works great!

    – kyle

27. No splicing – Great no splicing

    – Kip Sanley

28. Plug and Play! – Seems they fixed issues with this harness. 100% plug and play with my 2021 Ram Rebel. Mounting the light bar was the hard part this made the wiring super easy

    – kbooth

29. top of the line – this product is fantastic makes wiring the lightbar a snap with no splicing highly recommend great quality

    – john g wintheiser

30. Putco 529004 – Blade Connect Harness – Do Not Hack the wires this is What every one should get pricey but worth every PENNY trust me plug and play.Make sure when getting putco blade that it has the connectors not a bare wire ask the seller.Hearing that some get there 60 blade without connectors with just bare wires sure you can buy the female connectors somewhere but for the money u spend for 60 blade make sure it has everything to just connect it. White wire goes to white wire plug in the four pin connector did not need the black connected most be for camera or something in that nature.Reverse works nice and bright white blinkers amber work great also its a beautiful thing no cutting.Also i tried to plug it all in at first on outside tow connector DID not work until i actually plugged all in the harness put it together and worked great no issues so far everyone loves it spend the money (: 2014 ram 1500 4×4 5.7 hemi slt bighorn NO ISSUES HERE.

    – Jose Costa

31. A Must Have For Installing The Putco Blade! – Was very simple to install and worked as described. The installation is supported by a free online video produced by the manufacturer.

    – Jory Authement

32. Makes for easy install – Product to me is a must have if purchasing the Putco light bar.

    – Jason M. Coombs

33. Worth every penny. makes installation plug and play – Installation: Straightforward and simple. I highly recommend that you purchase the Blade Quick Connect. This makes installation plug and play and avoids the need to splice into wires and removing your left tail light. This is great if you are doing the work yourself and not comfortable splicing wires or if you pay someone to install then the time it saves (i.e. money) will more than pay for itself. Plus you get a more solid connection of the wires.

    – JAC

34. Worth every penny – Works perfectly. 7000x easier than cutting and splicing OEM equipment on your vehicle. Plus it s not permanent if you ever want to sell your vehicle.

    – Ian

35. Quick and Easy Installation with Professional Results – A must have if you don t want to splice into your truck s wiring. This harness is very easy to use and offers professional result. My installation looks very professional and this harness worked great. It s a little pricey but no other company out there makes this type of universal quick connect harness. 5/24/20 Update: used a trailer hitch for the first time since installation and harness and everything worked perfectly. As I stated before this quick connect harness is over priced but no other company makes this harness and I did my research.

    – Dr. Wil

36. Quick and Easy Installation with Professional Results – A must have if you don t want to splice into your truck s wiring. This harness is very easy to use and offers professional result. My installation looks very professional and this harness worked great. It s a little pricey but no other company out there makes this type of universal quick connect harness. 5/24/20 Update: used a trailer hitch for the first time since installation and harness and everything worked perfectly. As I stated before this quick connect harness is over priced but no other company makes this harness and I did my research.

    – Dr. Wil

37. Exactly what I needed – Fit perfect 2018 ram 2500 to stock harness

    – Ed

38. easy – fast install effertless and is great way to keep out salt intrusion

    – g man

39. Quick-n-Easy – Just what I needed did not want to hardwire into my system.

    – Gary C.

40. Worth the money – Easy plug and play

    – Herbert Livingstone jr

41. a must have – Works great! No splicing into any wiring. Love it.

    – Doug Alway

42. False advertising – Power connection missing from 7 pin adapter power adapter missing from matching 60 light bar

    – David SeikoDavid Seiko

43. Time saver for sure. – Once you figure out how to remove the factory connections this harness is a blessing and easy to install.The extra black wire is not needed so don t worry about it.I spent more time figuring out the factory connections and disconnecting them.My red blade (from Putco) looks fantastic.

    – David A.

44. Great Connector – Originally I was plugged into the trailer hitch connector for a light strip under my bed and after a few months of constant connection one of the connections started to corrode. I like having such a high quality sealed connectors!

    – Daniel Depatie

45. Great Connector – Originally I was plugged into the trailer hitch connector for a light strip under my bed and after a few months of constant connection one of the connections started to corrode. I like having such a high quality sealed connectors!

    – Daniel Depatie

46. Solid harness. – Good product If you don t want to splice or cut into your harness. Simple to install on my 17 Sierra. My only complaint is the reverse wire wasn t plug and play. But still easy to hard wire.

    – Dakota

47. Plug and play – Just like description says easy to install and truly play and play. Will save you from having to splice or cut into any of the factory wiring.

    – Carlos Suarez

48. Easy install – Really simple to install. Works great. Definitely worth the price.

    – CarNut

49. Need to Have when installing the light bar – Need to have this to make the light bar installation simple. No splicing plug and play

    – Charles Wentzel

50. Worked perfectly – This made my project SWEET!

    – Chillin 67

51. Jeep Gladiator install was super easy and worked perfect – This was sooooo worth the money. Totally saved the hassle of splicing wires and changing the factory wiring!!

    – Craig

52. Great. True plug and play. – Well worth the price. It s a true plug and play installation with the Putco blade lightbar.

    – Carlos O.Carlos O.

53. Well made heavy wrong harness – Heavy well made wiring harness. Made installation of light bar wiring very easy. Plugged in and working in a matter of minutes. Would recommend

    – candy

54. True plug and play – it took me longer to figure out the proper way to disconnect the factory connector than install the new connectors total time 5 minutes worth purchasing unless you want to splice wires

    – C R S

55. This product comes as advertised. – This adapter is a great product. Very easy install with good instructions. However harness is a little over priced in my opinion.

    – BT. Sudsy

56. The ONLY way to do this install. – Straight forward easy to install. Absolutely NO damage to the existing wiring.Best way to go IMO!!!

    – Bradley J Norris

57. Easy – Easy install

    – Blake

58. Easy to install – Worked fine on my 2016 Silverado and the Putco tailgate light bar.

    – 3rdrock

59. Fit good – Perfect for my Ram 1500 2017 one thing picture show white and Black wire with connection but mine have no connection!!

    – Andre Mailloux

60. Worth the money! – This is a must if you don t want to hardwire your Putco Blade! Plug and play its that easy! Would definitely buy again!

    – Adam Rutger

61. Make an Putco light bar easier! – This part simplifies the installation process!The part is built well and worth the cost!

    – A Ray